11.1.7
Hardware error time CPU operation mode setting
This setting determines whether to stop or continue the output (Y) from the C Controller module and writing to the
buffer memory if a hardware error occurs in an intelligent function module or interrupt module.
(1) Setting method
For this setting, use the following functions in Setting/monitoring tools for the C Controller module.
•
Project view "Parameter" "CCPU Parameter" <<I/O assignment settings>>
"Detailed Settings" "CPU Operation Mode at H/W Error"
(2) Precautions
The hardware error time CPU operation mode setting takes effect when:
• The C Controller system is powered on.
• The C Controller module is reset.
CHAPTER 11 BASIC FUNCTIONS
Q24DHC-V
Q24DHC-VG
Q24DHC-LS
Q26DHC-LS
Q12DC-V
11
153