Ethernet Wiring - Mitsubishi Electric MELSEC Q Series User Manual

8.7.2

Ethernet wiring

Described in this section are the specifications and wiring of compatible twisted pair cables.
(1) Ethernet port
(a) Q24DHCCPU-V/-VG/-LS and Q26DHCCPU-LS
There are 2 types of Ethernet port: user Ethernet port (CH1 and CH2) and system Ethernet port (S CH1). Use
them accordingly to peripherals to be connected.
Ethernet port
User Ethernet port
(CH1 and CH2)
For "-LS", consult with the
partner (operating system vendor).
System
Ethernet port
(S CH1)
(b) Q12DCCPU-V
Ethernet port
Built-in
Ethernet port
(CH1 and CH2)
The reference time from powering up the C Controller module to establishment of communication with Ethernet port is as
follows. Required time may vary depending on system configurations.
• User Ethernet port (CH1 and CH2)
• System Ethernet port (S CH1)
• Built-in Ethernet port (CH1 and CH2) : 15 seconds
Q24DHC-V
Connection destination
User program development environment (Personal computer)
CW Workbench
Personal computer for maintenance
Telnet function
FTP function
Host communication network's peripherals (MES server, etc.)
Personal computer with Setting/monitoring tools for the C Controller module installed
GOT
Connection destination
User program development environment (Personal computer)
CW Workbench
Personal computer for maintenance
Telnet function
FTP function
Host communication network's peripherals (MES server, etc.)
Personal computer with Setting/monitoring tools for the C Controller module installed
GOT
: 30 seconds
: 15 seconds
CHAPTER 8 INSTALLATION AND WIRING
Q24DHC-VG Q24DHC-LS Q26DHC-LS Q12DC-V
8
127