Mitsubishi Electric MELSEC Q Series User Manual page 295

Meaning of "mn", "**", "M", and "N" in parameters is indicated below.
mn : Start I/O No. divided by 16
** : Any given value
N : The module number
M : Network type
Network types are indicated in the following table.
M
CC-Link IE Control (Control station), CC-Link IE Control Extended mode (Control station),
1 MNET/10 mode (Control station),
MNET/H mode (Control station), MNET/H Extended mode (Control station)
CC-Link IE Control (Normal station), CC-Link IE Control Extended mode (Normal station),
2 MNET/10 mode (Normal station),
MNET/H mode (Normal station), MNET/H Extended mode (Normal station)
8 CC-Link IE Field (Master station)
9 CC-Link IE Field (Local station)
M
0 Master station
1 Local station
CC-Link IE / MELSECNET setting
Network type
CC-Link setting
Network type
CHAPTER 15 PARAMETER
293
15