Mitsubishi Electric MELSEC Q Series User Manual page 354

2.
Write the created file into a CompactFlash card.
3.
Insert the CompactFlash card into the C Controller module.
4.
Reset or power on the C Controller module.
5.
Check that RUN LED flashes.
The script file "STARTUP.CMD" in the CompactFlash card is started.
Command(s) described in the script file "STARTUP.CMD" is executed and files in the CompactFlash card
are copied into the standard ROM or standard RAM of the C Controller module.
6.
Check that the RUN LED is lit or goes off.
The script ends.
7.
Power OFF the C Controller module and remove the CompactFlash card.
8.
Power on the C Controller module.
9.
Check that RUN LED flashes.
The script file "STARTUP.CMD" (a script file to load the user program) copied into the standard ROM or
standard RAM is started.
10.
Check that the RUN LED is lit or goes off.
The user program is executed
352