Mitsubishi Electric MELSEC Q Series User Manual page 170

(4) Relation between remote operation and RUN/STOP status
This section explains the relation between the remote operations and the switch setting of the C Controller
module.
(a) Relation between remote operation and RUN/STOP status of C Controller module
*1 :
*2 :
(b) Remote operations from the same Setting/monitoring tools for the C Controller
module or user program
When more than one remote operation are attempted from the same Setting/monitoring tools for the C
Controller module or the same user program, the status resulted from the last one is effective.
(c) Remote operations from multiple Setting/monitoring tools for the C Controller
module or user programs
For the C Controller module to which remote operation has already been executed, another remote operation
can be executed from a different Setting/monitoring tools for the C Controller module or user program.
168
Switch
RUN
RUN RUN
STOP STOP
Reset is available when the C Controller module with the switch set to RUN has been placed in
the STOP status by remote STOP.
Includes the case where the C Controller module is stopped due to an error.
Remote operation
STOP PAUSE
STOP PAUSE
STOP STOP
RESET
*1
Cannot operate
*2
RESET