Appendix 14 Bios Setup - Mitsubishi Electric MELSEC Q Series User Manual

Appendix 14
(1) Starting the setup
When Q24DHCCPU-VG/-LS and Q26DHCCPU-LS is started up, AMIBIOS is started as well.
The setup program can be started by the following operation while the BIOS setup screen is displayed.
• When executing POST, press the  key while the following message is displayed in the middle of the
*1
screen.
'Press DEL to run Setup'
When executing POST, do not press the  key while the following message is displayed on the screen.
*1 :
'Press F11 for BBS POPUP'
When the message is disappeared before pressing the
(2) BIOS setup screen
(a) Main tab screen
Item
AMIBIOS
Version
BuildData
ID
Processor
(CPU)
Speed
Count
System Memory
Size
*1
System Time
*1
System Data
CMC
*1 : The setting contents are applied immediately.
(b) Exit screen
Item
Save Changes and Exit
502
BIOS Setup
Description
Display the information about BIOS.
Display the core version.
Display the date to be built.
Display the ID for administration.
Display the information about the processor.
Display the CPU name and operation frequency.
Display the operation frequency.
Display the number of embedded CPUs.
Display the information of system memory.
Display the capacity of work memory.
Display the time.
Display the date.
Display CMC code.
Description
Exit the BIOS setup.

key, reset the C Controller module or restart the user CPU.
: Applicable : Not applicable
Setting
applicability


