Mitsubishi Electric MELSEC Q Series User Manual page 226

(3) Devices specified by functions
(a) Other station link device access
In the dedicated function libraries, specify a device name defined for each function.
For access to other station link device(s), specify the direct link device (other station side).
Link device
Link input
Link output
Link relay
Link register
Remote input
Remote Link output
Remote register
Link special relay
Link special register
*1 : Bracketed values () are argument values (1-255) for device name specifications. Specify the "Network No.".
(b) Other station buffer memory access
For access to other station buffer memory, specify the special direct buffer register and intelligent function
module buffer memory.
Link device
Remote input
Remote Link output
Remote register
Link special relay
Link special register
*1 : Bracketed values () are argument values (0-255) for device name specifications. Specify "Start I/O No. / 10
(c) Other station control CPU module access
For devices to be specified by the user program in order for access to the other stations' controlled CPU modules,
refer to the following.
Page 366, Section 22.5
224
CC-Link IE Controller Network,
MELSECNET/H
LX
DevLX(1) to DevLX(255)
LY
DevLY(1) to DevLY(255)
LB
DevLB(1) to DevLB(255)
LW
DevLW(1) to DevLW(255)
RX –
RY –
RWw –
RWr –
SB
DevLSB(1) to DevLSB(255)
SW
DevLSW(1) to DevLSW(255)
Specified function device
name
RX
RY
RWw
DevSPG(0) to DevSPG(255)*1
RWr
SB
SW
Specified function device name
MELSEC data link functions
CC-Link IE Field
Network
*1
*1
*1
*1
DevLX
DevLY
DevLW
DevLW
*1
DevSB
*1
DevSW
CC-Link
– –
– –
– –
– –
DevRX
DevRY
DevRW
DevRW
DevSB
DevSW
".
H