Mitsubishi Electric MELSEC Q Series User Manual page 437

● The following values are stored with an event No.
Event
level
The C Controller module is running normally, but the
Information
customer system may be affected.
Warning The C Controller module is not running normally.
Error The C Controller module is not running.
● In any of the following cases, please consult your local Mitsubishi service center or representative, explaining the details
of the problem.
• Any event No. not listed in the following table is detected
• The actions indicated in the following table does not resolve the program
(1) Actions against each event No. that occurs in "MQbfDrv"
Actions against each event No. that occurs in "MQbfDrv" are described below.
Event No. Event type
C000011E System (Err.) Failed to allocate memory required for the driver start-up.
H
C0000127 System (Err.) SYSTEM WDT ERROR occurred.
H
C0000131 System (Err.) USER WDT ERROR occurred.
H
C0000201 System (Err.) AC/DC DOWN occurred.
H
C0000202 System (Err.) CONTROL-BUS.ERR. occurred.
H
C0000204 System (Err.) UNIT VERIFY ERR. occurred.
H
C0000206 System (Err.) FUSE BREAK OFF occurred.
H
C0000207 System (Err.) SP.UNIT DOWN occurred.
H
C0000208 System (Err.) CONTROL-BUS.ERR. occurred.
H
C0000209 System (Err.) SP.UNIT LAY ERR. occurred.
H
C000020A System (Err.) PARAMETER ERROR occurred.
H
An error occurred during module initialization.
C000020B System (Err.)
H
(Only the first error is displayed.)
C000020E System (Err.) A CPU module built-in battery error occurred.
H
C0000210 System (Err.) MULTI CPU DOWN occurred.
H
C0000211 System (Err.) MULTI EXE.ERROR occurred.
H
C0000212 System (Err.) MULTI CPU ERROR occurred.
H
C0000213 System (Err.) SP.PARAMETER ERROR occurred.
H
C0000214 System (Err.) LINK PARAMETER ERROR occurred.
H
C0000215 System (Err.) I/O INT.ERROR occurred.
H
C0000216 System (Err.) MAIN CPU DOWN occurred.
H
C0000218 System (Err.) LINK REFRESH TIME OVER occurred.
H
C0000219 System (Err.) SINGLE PS.DOWN occurred.
H
C000021A System (Err.) SINGLE PS.ERROR occurred.
H
C000021B System (Err.) MULTI-C.BUS.ERR. occurred.
H
bit 31 16 15
Higher word value Lower word value
Event level
0 x 4000: Information
0 x 8000: Warning
0 x C000: Error
Description
Event
bit 0
"Source" specific event No
Corrective action
Refer to the event detail field of each event and take
appropriate actions if the customer system may be
affected.
Refer to the processing field of each event and take
appropriate actions.
Corrective action
• Increase the system memory.
• Reduce the memory usage of other programs.
Take corrective actions for error code 5000.
Take corrective actions for error code 5001.
Take corrective actions for error code 1500.
Take corrective actions for error code 1413, 1414, 1415, and 1416.
Take corrective actions for error code 2000.
Take corrective actions for error code 1300.
Take corrective actions for error code 1401 and 1403.
Take corrective actions for error code 1412.
Take corrective actions for error code 2100, 2103, 2106, 2107, 2108,
2120, 2121, 2122, 2124, 2125, 2126, and 2150.
Take corrective actions for error code 3000, 3001, 3010, 3012, 3014,
3015, and 3016.
Take corrective actions corresponding to the error code displayed in
the event information.
Take corrective actions for error code 1600.
Take corrective actions for error code 7000 and 7002.
Take corrective actions for error code 7010, 7011, and 7013.
Take corrective actions for error code 7020.
Take corrective actions for error code 3300, 3301, 3302, and 3303.
Take corrective actions for error code 3100, 3101, 3102, 3103, 3104,
3105, and 3107.
Take corrective actions for error code 1310.
Take corrective actions for error code 1000 and 1009.
Take corrective actions for error code 5012.
Take corrective actions for error code 1510.
Take corrective actions for error code 1520.
Take corrective actions for error code 1430, 1431, 1432, 1433, 1434,
1435, 1436, 1437, and 1439.
APPENDICES
A
435