Mitsubishi Electric MELSEC Q Series User Manual page 115

Connection from 1 Personal computer to multiple C Controller modules is not allowed.
(b) Connection via the Ethernet port
Use the system Ethernet port (S CH1)/built-in Ethernet port (CH1 and CH2) for connection.
For wiring of the Ethernet cable, refer to the following.
Page 127, Section 8.7.2
Remark
● For the functions of system Ethernet port/built-in Ethernet port, refer to the following.
Page 200, Section 12.2
(c) Connection via the CPU module by the multiple CPU system
Connect the multiple CPU system to the C Controller module(s) of the other CPUs via the CPU module
connected with a Personal computer.
(d) Connection via GOT (support of GOT transparent function)
Use the GOT transparent function to connect via GOT.
For cable to connect with GOT, settings on GOT and precautions, refer to the manual for respective GOT to
connect.
 Connection manuals for GOT2000 series
(Mitsubishi Electric Products), (Non-Mitsubishi Electric Products 1),
(Non-Mitsubishi Electric Products 2), (Microcomputer, MODBUS/Fieldbus Products, Peripherals)
 Connection manuals for GOT1000 series
(Mitsubishi Electric Products), (Non-Mitsubishi Electric Products 1),
(Non-Mitsubishi Electric Products 2), (Microcomputer, MODBUS Products, Peripherals)
Q24DHCCPU-V/-VG/-LS
Q26DHCCPU-LS
CHAPTER 7 SYSTEM CONFIGURATION
Q12DCCPU-V
7
113