Mitsubishi Electric MELSEC Q Series User Manual page 100

Module type
MES interface module
ID interface module
Simple motion module
C Controller interface module
GP-IB module
GOT
Remark
● Modules available for multiple CPU system
The C Controller module can control I/O modules and intelligent function modules listed in this section as control
modules. For modules controlled by the other CPUs (non-controlled modules), follow the specifications of each CPU
module.
For details of control modules, refer to the following.
QCPU User's Manual (Multiple CPU System)
● Online change by multiple CPU system
Although online module change for modules controlled by this product is not supported, modules controlled by the CPU
modules with online module change function can be subject to online module change.
98
Model
QJ71MES96
QD35ID1, QD35ID2
QD77MS2, QD77MS4, QD77MS16, QD77GF16
Q173SCCF
EQGPIB
For applicable GOT models, refer to the following.
 Connection manuals for GOT2000 series (Mitsubishi Electric Products),
(Non-Mitsubishi Electric Products 1), (Non-Mitsubishi Electric Products 2),
(Microcomputer, MODBUS/Fieldbus Products, Peripherals)
 Connection manuals for GOT1000 series (Mitsubishi Electric Products),
(Non-Mitsubishi Electric Products 1), (Non-Mitsubishi Electric Products 2),
(Microcomputer, MODBUS Products, Peripherals)
Restriction on
support version
Use the product with a
serial number whose first
five digits are "12092" or
higher.
–
–
–
–