Mitsubishi Electric MELSEC Q Series User Manual page 279

Setting Internal device
data (System, user)
Bit Word
*1
(n1) –

*2
(n2) –

*3 *4
–
(D1)

*3 *4
–
(D2) 
*1 : Index modification is allowed for basic model QCPUs, high performance model QCPUs and universal model QCPUs.
*2 : Index modification is allowed for basic model QCPUs and universal model QCPUs.
*3 : Only when both of (D1) and (D2) are omitted, they can be actually omitted.
*4 : Local devices cannot be used.
Remark
For details of D(P).GINT instruction used for interrupt from a Motion CPU, refer to the following.
SV13/22 Programming Manual (Motion SFC) [type Q173D(S)/Q172D(S)]
(a) Setting data
Setting
data
Start I/O No. of target CPU
(n1)
Actually specified values are as follows:
CPU No.1: 3E0
(n2) Interrupt pointer No. (0 to 15)
Completion device
(D1+0): Device that is turned ON for one scan upon completion of the instruction
(D1)*1 processing
(D1+1): Device that is turned ON for one scan upon failure of the instruction processing
(When failed, D1+0 is also turned ON.)
(D2)*1 Device where the completion status data is stored.
*1 : Only when both of (D1) and (D2) are omitted, they can be actually omitted.
(b) Usable devices
Internal device
Bit
M, L, B
*1 : Number of bit device digits can be specified for word data.
It can be specified with
For example, 16 points from M0 to M15 are specified with
Available devices
File register Link direct device
R, ZR J¥
Bit Word Bit
–

–

*4
–

*4
–

10
H
, CPU No.2: 3E1 , CPU No.3: 3E2
H H
*1
Word
D, W, @
Digits Bit device start No.
CHAPTER 14 FUNCTIONS USED BY MULTIPLE CPU SYSTEM
: Applicable : Partly applicable : Not applicable
Intelligent
function module
U¥G
Word
–
–
–
–
Setting
, CPU No.4: 3E3
H H
File register
R, ZR
K4M0
Index Constant
Others
register, Zn K, H


–
–
Data type
BIN 16 bits
BIN 16 bits
Bit
Word
Constant
K, H
277
–
–
–
–
14