Mitsubishi Electric MELSEC Q Series User Manual page 474

(2) Parameter replacement
The following indicates the procedure to replace Q12DCCPU-V (Basic mode) parameter with Q12DCCPU-V
(Extended mode) parameter.
1.
Use Setting/monitoring tools for the C Controller module (SW4PVC-CCPU) to read the parameter
created by Setting/monitoring tools for the C Controller module (SW3PVC-CCPU).
2.
Use Setting/monitoring tools for the C Controller module (SW4PVC-CCPU) to write the parameter
into Q12DCCPU-V (Extended mode).
Use the following function of Setting/monitoring tools for the C Controller module (SW4PVC-CCPU) to read the parameter of
Setting/monitoring tools for the C Controller module (SW3PVC-CCPU)
• [Project]  [Open another format data]  [Open parameter setting file...]
For details, refer to the following manual.
 Setting/Monitoring Tools for the C Controller Module Version 4 Operating Manual
472