7.3.3
Battery
The batteries available for the C Controller module are listed below.
(1) Specifications
Item
Type
Initial voltage
Nominal current
capacity
Battery life when stored
Battery life when used
Lithium content
Application
Accessories
*1 :
The lithium content of batteries manufactured in July 2017 or earlier differs from this list.
For details, refer to the following.
• Changes in battery parts (FA-A-0242)
*2 :
Supplied only with Q7BAT-SET.
(2) Precautions
During use, observe the following precautions. Improper use of batteries may corrupt the battery backup RAM
data and clock data.
• Use the C Controller module with a battery installed.
• For operations without any battery, use the battery less drive function.
• If any battery error has occurred, replace the battery.
• Follow the procedures in this document for installation and replacement of batteries.
Remark
● For battery installation procedures, refer to Page 119, Section 8.3.
● For battery replacement procedures, refer to Page 136, Section 9.3.
● For details of battery less drive, refer to Page 190, Section 11.11.
● For battery lifetime, refer to Page 487, Appendix 8.
● For battery regulations applicable in EU countries and precautions for battery transportation, refer to the following.
QCPU User's Manual (Hardware Design, Maintenance and Inspection)
90
Model
Q6BAT
Manganese dioxide lithium primary battery
3.0V
1800mAh
Actual 5 years (room temperature)
Page 487, Appendix 8
*1
0.57g
Backup of the battery backup RAM data, Backup of clock data
–
Q7BAT
5000mAh
1.55g
*2
Battery holder