Mitsubishi Electric MELSEC Q Series User Manual page 266

(4) Setting example
Settings of the reception and transmission areas for auto refresh in 2 ranges (Setting No.1 and Setting No.2) in a
configuration in which an universal model QCPU and a C Controller module are used as No.1 and No.2 modules,
respectively is described below.
Auto refresh setting for Universal model QCPU (CPU No.1)
264
Universal model QCPU (CPU No.1)
Multiple CPU high speed transmission area
CPU No.1
User setting area
Auto refresh area
B0
CPU No.1 send area
B1F
W0
CPU No.1 send area
W1F
CPU No.2
User setting area
Auto refresh area
B20(13038)
CPU No.2 receive area
B3F(13039)
W20(13040)
CPU No.2 receive area
W3F(13071)
Auto refresh setting for C Controller module (CPU No.2)
C Controller module (CPU No.2)
Multiple CPU high speed transmission area
CPU No.1
User setting area
Auto refresh area
13038(B0)
CPU No.1 receive area
13039(B1F)
13040(W0)
CPU No.1 receive area
13071(W1F)
CPU No.2
User setting area
Auto refresh area
13038
CPU No.2 send area
13039
13040
CPU No.2 send area
13071