Mitsubishi Electric MELSEC Q Series User Manual page 41

No. Name
12) Battery
13) Battery connector pin
14) RS-232 connector (CH3)
®
PCI Express expanded
15)
connectors
16)
Analog RGB output connector
*2 : Connect the display before powering ON.
Q24DHCCPU-V
Battery to retain the battery backup RAM and integral clock (RTC) data during power OFF.
For connection of the battery lead wires.
(Lead wires are disconnected from the connector when shipping to prevent the battery from
consuming.)
Connector used for connection with an RS-232 compatible device.
®
PCI Express interface for connection with a device with PCI Express
details, contact our local Mitsubishi representative or distributor.
*2
–
Description
Q24DHCCPU-VG
–
Analog RGB output
connector used for
connection with a general-
purpose analog RGB
display.
CHAPTER 2 PART NAMES
Q24DHCCPU-LS
Q26DHCCPU-LS
For the specification when
connecting to the supported
devices, consult the partner
(operating system vendor).
For "-LS", consult with the
partner (operating system vendor).
®
and PCI bus. For
For the specification when
connecting to the supported
devices, consult the partner
(operating system vendor).
For "-LS", consult with the
partner (operating system vendor).
39
2