Chapter 13 Functions Accessed Via A Network Module - Mitsubishi Electric MELSEC Q Series User Manual

CHAPTER 13
This chapter describes the functions used for network module(s). The C Controller module can establish data
communicate with network-connected devices by using various network modules.
For multiple CPU system configuration, access via any network module controlled by the other modules is not allowed.
(1) Network module
Network modules available for the C Controller module are listed below:
• CC-Link IE Controller Network module
• MELSECNET/H module
• CC-Link IE Field Network master/local module
• CC-Link module
For the module names, refer to the following.
Page 96, Section 7.5.1
(2) Precautions
For the number of mountable network modules and precautions for use, refer to the following.
• Precautions for mountable modules Page 87, Section 7.2
• Precautions for use Page 99, Section 7.5.2
(3) Network parameter setting
To use network module(s), network parameter setting is necessary.
For network parameter setting, refer to the following.
MELSEC-Q CC-Link IE Controller Network Reference Manual
Q Corresponding MELSECNET/H Network System Reference Manual (PLC to PLC network)
MELSEC-Q CC-Link IE Field Network Master/Local Module User's Manual
MELSEC-Q CC-Link System Master/Local Module User's Manual
Remark
Use Setting/monitoring tools for the C Controller module to set parameters.
For operation procedures, refer to the following manual.
Setting/Monitoring Tools for the C Controller Module Version 4 Operating Manual
208
FUNCTIONS ACCESSED VIA A
NETWORK MODULE
Access via the
network module
C Controller
module
CC-Link IE Controller Network, MELSECNET/H, CC-Link IE controller network (MELSECNET/H)
CC-Link IE Field Network, CC-Link CC-Link IE field network (CC-Link)