Event History Data Are Incorrect; Refresh Function (Data Refresh, Link Refresh) And Data Link Of Network Are Stopped; Partner Application Does Not Operate - Mitsubishi Electric MELSEC Q Series User Manual

23.4.10

Event history data are incorrect

Check the following items.
Error information, BATTERY ERROR, is lit red in the
"CCPU diagnostics" of Setting/monitoring tools for the
C Controller module.
23.4.11
Refresh function (data refresh, link refresh) and data link of
network are stopped
Check the following items.
The multiple CPU high-speed transmission area is specified
to the data refresh setting without selecting "Use multiple
CPU high speed communication" in the multiple CPU
setting.
An intelligent function module that cannot be accessed is
specified to the data refresh setting.
23.4.12

Partner application does not operate

Check the following items.
C Controller module has been initialized.
Data necessary for the partner application has been deleted
from FTP or user program.
● Reinstalling the partner application
For specifications and functions related to the partner application, refer to the manuals provided by the partner
(application vendor), or consult the partner (application vendor).
408
Check item
Check item
Check item
Corrective action
Battery replacement
Corrective action
Clear the multiple CPU high-speed transmission area in the
data refresh setting.
Or, select "Use multiple CPU high speed communication" and
configure the settings to be accessed.
Check the I/O assignment setting and the mounting status of
the intelligent function module and configure the settings to be
accessed.
Corrective action
The partner application will be deleted by performing the
hardware initialization setting (Page 62, Section 6.1).
Reinstall the partner application when deleted.
Check data in the standard ROM to find if any data necessary
for the partner application has been deleted.
If deleted, reinstall the partner application.