Samsung OfficeServ 7200 Programming Manual page 52

CHAPTER 2. MMC Programming
No Feature
14 NOT CONT.CID
15 AUTO ANS CO
16 ENBLOCK 2LCD
17 STN NO RING
DEFAULT DATA
SEE DESCRIPTION
SOME OPTIONS DEPEND ON COUNTRY
ACTION
1. Press Transfer button and enter 110.
Display shows:
2. Dial the station number (e.g. 205)
OR
Press Volume button to select station and
press the Right Soft button to move the cursor.
OR
Select all stations
3. Dial option number from above list (e.g. 03
OR
Press Volume button to select option and
press the Right Soft button to move the cursor.
4. Dial 1 for ON or 0 for OFF.
OR
Press Volume button to select ON or OFF.
Press Left or Right Soft button to return to step 2.
OR
5. Press Transfer button to save and exit.
OR
Press Speaker button to save and advance to
next MMC.
Samsung Business Communications
Default
ON When OFF, the Caller ID will be displayed for the dura-
tion of the call. When ON, displays timer for duration of
call (if AUTO TIMER also set on).
OFF When ON, keyset will automatically answer outside calls
through the speakerphone. For this to work, the keyset
must be set to Auto Answer mode in MMC 103. Calls to
groups cannot be auto-answered.
OFF Enables Enbloc dialling for 2-Line LCD phones.This op-
tion only works when 2 LINE ENBLOCK option is en-
abled in MMC 861.
OFF When ON, no tones will be heard when phone rings.
OfficServ 7200 Programming Guide
Description
DISPLAY
[201] STN ON/OFF
AUTO HOLD :OFF
[205] STN ON/OFF
AUTO HOLD :OFF
[205] STN ON/OFF
HOT KEYPAD :ON
[201] STN ON/OFF
HOT KEYPAD :OFF
2-21