Samsung OfficeServ 7200 Programming Manual page 313

CHAPTER 2. MMC Programming
[810] HALT PROCESSING
Used only in the event that all data processing needs to be stopped either in a single cabinet
slot or in the entire system.
DEFAULT DATA
PROC
ACTION
1. Press Transfer button and enter 810.
Display shows:
2. Enter cabinet selection via dial keypad.
OR
Press Volume button to make selection and
press Right Soft button to advance cursor.
OR
Select all cabinets and slots (and go to step 4).
3. Enter slot number via dial keypad.
OR
Press Volume button to make selection and
press Right Soft button to advance cursor.
4. Enter 1 for HALT or 0 for PROC.
OR
Press Volume button to make selection and press
Right Soft button to enter and return to step 2.
5. Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
RELATED ITEMS
NONE
Samsung Business Communications
OfficServ 7200 Programming Guide
DISPLAY
HALT/PROCESSING
C:ALL S:ALL PROC
HALT/PROCESSING
C:1 S:ALL PROC
HALT/PROCESSING
C:ALL S:ALL PROC
HALT/PROCESSING
C:1 S:2 PROC
2-282