Samsung OfficeServ 7200 Programming Manual page 158

CHAPTER 2. MMC Programming
[422] TRUNK COS
Used to assign a class of service to each trunk for each of the six ring plans available.
There are 30 different classes of service that are defined in MMC 701, Assign COS Con-
tents. Classes of service are numbered 01-30. Trunk COS applies on Tandem connections.
DEFAULT DATA
ALL RING PLANS: COS 01
ACTION
1. Press Transfer button and enter 422.
Display shows first trunk:
2. Dial trunk number (e.g., 705)
OR
Use Volume button to scroll through trunks.
Press Right Soft button to advance to step 3.
OR
Use Volume button to scroll through trunks and
press Left Soft button to advance to step 4.
OR
Select all trunks.
3. Enter ring plan class of service (e.g., 05)
OR
Use Volume button to scroll through classes of ser-
vice and press Right Soft button to advance to
step 4.
OR
Use Volume button to scroll through classes of ser-
vice and press Left Soft button to return to step 2.
4. Enter the next ring plan class of service (e.g., 05)
OR
Use Volume button to scroll through classes of ser-
vice and press Right Soft button to return to
step 2.
OR
Use Volume button to scroll through classes of ser-
vice and press Left Soft button to return to the previ-
ous step.
5. Press Transfer button to save and exit.
OR
Press Speaker button to save and advance to next
MMC.
Samsung Business Communications
OfficServ 7200 Programming Guide
DISPLAY
[701] TRK COS
1:01 2:01 3:01
[705] TRK COS
1:01 2:01 3:01
[ALL] TRK COS
1:01 2:01 3:01
[705] TRK COS
1:05 2:01 3:01
[705] TRK COS
1:05 2:05 03:01
2-127