Samsung OfficeServ 7200 Programming Manual page 386

CHAPTER 2. MMC Programming
No Code
MJD--
33 MJD01
34 MJD02
35 MJD03
36 MJD04
37 MJD05
38 MJD06
39 MJD07
40 MJD08
41 MJD09
42 MJD10
43 MJD11
44 MJD12
45 MJD13
46 MJD14
47 MJD15
48 MJD16
49 MJD17
Samsung Business Communications
Alarm Name
DTRK Error ISDN or E1 card Fault
Sync Failure Clocking on TEPRI cards has become asynchronous.
Sync Recovery Clocking on TEPRI cards has become synchronous.
Red Alarm Locally detected loss of PCM carrier on TEPRI card for
more than 250 ms.
Alarm Data = Cabinet, Slot (Cx-Syy)
Red Alarm Rec PCM carrier detected locally on TEPRI cards.
Alarm Data = Cabinet, Slot (Cx-Syy)
Yellow Alarm Remotely detected failure transmitted in frame on
TEPRI card.
Alarm Data = Cabinet, Slot (Cx-Syy)
Yellow Alarm Remotely detected failure restored transmitted on
Rec TEPRI card.
Alarm Data = Cabinet, Slot (Cx-Syy)
Blue Alarm All 1's being transmitted on facility on TEPRI card.
Alarm Data = Cabinet, Slot (Cx-Syy)
Blue Alarm Rec A blue alarm condition has been cleared.
Alarm Data = Cabinet, Slot (Cx-Syy)
Bit Error Alarm Alarm is activated when the error rate exceeds 1x10
rors. Note: 1x10
threshold for major alarm errors on E1, PRI or BRI.
Alarm Data = Cabinet, Slot (Cx-Syy)
NTWRK Event An Implausible event has occurred on the PRI or BRI
Network digital line. Protocols do not match or sub-
scriber ID mismatch.
Alarm Data = Cabinet, Slot (Cx-Syy)
SPID Init Error The BRI received an error from the network
Alarm Data = Cabinet, Slot, Channel (Cx-Syy-czz)
SPID Init Rec The BRI has recovered from an error on the network
Alarm Data = Cabinet, Slot, Channel (Cx-Syy-czz)
LPBK Error Internal on demand loopback failed.
Alarm Data = Cabinet, Slot, Channel (Cx-Syy-czz)
LPBK Recovery Internal on demand loopback test passed.
Alarm Data = Cabinet, Slot, Channel (Cx-Syy-czz)
BRI DL Unavail A BRI data link is out of service.
Alarm Data = Cabinet, Slot, Channel (Cx-Syy-czz)
BRI DL Recovery A BRI data link is back in service.
Alarm Data = Cabinet, Slot, Channel (Cx-Syy-czz)
RAM Error An error has occurred in the TEPRI or BRI card RAM.
Alarm Data = Cabinet, Slot (Cx-Syy)
OfficServ 7200 Programming Guide
Definition
-6
is threshold for minor alarm, 1 x 10
-6
er-
-3
is
2-355