Samsung OfficeServ 7200 Programming Manual page 165

CHAPTER 2. MMC Programming
[434] CONNECTION STATUS
This read-only MMC will confirm the connection status of stations or trunks. Display
status displays the status of a station or trunk at the time requested. If a conference is in
progress with the selected trunk or station, the display will show one of the conference par-
ties and an arrow ( ). The technician or system administrator can then display the other
parties in the conference. If a station or trunk is in an idle state, the display will show
'IDLE'. If the station or trunk selected is not a valid selection, the display will show 'IN-
VALID DATA'. If the station or trunk is made busy by the CPU, the display will show
'MADE BUSY'. If the station is in busy state with no other connection, the display will
show 'BUSY' only.
DEFAULT DATA
NONE
ACTION
Display trunk connection status
1. Press Transfer button and enter 434.
2. Enter station or trunk number.
Display show connection status:
3. Enter another station or trunk.
OR
Press Transfer button to exit.
Display station connection status
1. Press Transfer button and enter 434.
2. Enter station or trunk number.
Display show connection status.
3. Enter another station or trunk.
OR
Press Transfer button to exit.
Samsung Business Communications
OfficServ 7200 Programming Guide
DISPLAY
DISPLAY STATUS
201 IDLE
DISPLAY STATUS
702 227
DISPLAY STATUS
702 227
DISPLAY STATUS
201 IDLE
DISPLAY STATUS
235 715
DISPLAY STATUS
235 715
2-134