Programming Procedures - Samsung OfficeServ 7200 Programming Manual

CHAPTER 2. MMC Programming

Programming Procedures

This section describes the procedure for each MMC.
[100] STATION LOCK
Allows the system administrator or technician to lock or unlock an individual station or all
stations simultaneously. The three options are as follows:
No Type
0 UNLOCKED
1 LOCKED OUT
2 LOCKED ALL
CONDITIONS
Check if the station lock function is disabled in MMC 301, ASSIGN STATION COS. If so,
the station cannot be locked, but a locked station can be unlocked.
DEFAULT DATA
ALL STATIONS UNLOCKED
ACTION
1. Press Transfer button and enter 100.
Display shows:
2. Dial station number (e.g., 205)
OR
Press Volume button to select station and
press Right Soft button to move cursor.
OR
Select all stations.
3. Enter 0 to unlock or 1 to lock (e.g., 1)
OR
Press Volume button to make selection and
press Right Soft button to return to step 2.
Samsung Business Communications
Unlocks a locked station.
The phone cannot make calls outside the system. It can however make
and receive intercom calls and receive incoming Trunk Line calls. When
in this mode the Hold button will flash slow RED.
The phone cannot make or receive any calls. When in this mode the
Hold button will light steady RED.
OfficServ 7200 Programming Guide
Description
DISPLAY
[201] STN LOCK
UNLOCKED
[205] STN LOCK
UNLOCKED
[ALL] STN LOCK
?
[205] STN LOCK
LOCKED OUT
2-2