Samsung OfficeServ 7200 Programming Manual page 141

CHAPTER 2. MMC Programming
[412] ASSIGN TRUNK SIGNAL
Allows the assignment of analogue DID or E & M cards for proper signalling. These trunks
can also use the translation tables in MMC 714.
CONDITIONS
An analogue E & M/DID Trunk card must be installed in the OfficeServ 7200 system. Oth-
erwise, the 'NO E & M/DID TRUNK' message is displayed.
DEFAULT DATA
IMMEDIATE START
ACTION
1. Press Transfer button and enter 412.
Display shows:
2. Enter desired trunk number (e.g., 705)
OR
Press Volume button to make selection and
press Right Soft button to move cursor.
OR
Select all trunks.
3. Enter desired trunk type selection from above list.
OR
Press Volume button to make selection and
press Right Soft button.
4. Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
RELATED ITEMS
MMC 416
MMC 714
Samsung Business Communications
No Signalling condition type
0 IMMEDIATE START
1 DELAYED START
2 WINK START
3 NO ANSWER BACK
4 DIRECT BACK
ASSIGN E&M/DID RINGDOWN
DID NUMBER AND NAME TRANSLATION
OfficServ 7200 Programming Guide
DISPLAY
[701] TRK SIGNAL
IMMEDIATE START
[705] TRK SIGNAL
IMMEDIATE START
[ALL] TRK SIGNAL
IMMEDIATE START
[705] TRK SIGNAL
WINK START
2-110