Samsung OfficeServ 7200 Programming Manual page 108

CHAPTER 2. MMC Programming
[306] HOT LINE/OFF HOOK SELECTION
Allows a station to make a predetermined call, similar to a ring-down circuit, upon the ex-
piration of a timer (see MMC 502, STATION TIMERS, Off-Hook Selection Timer).
CONDITIONS
The hotline destination can be a station, a station group, a trunk, a trunk group or an
external number.
There is a maximum of 18 digits in the dial string for external numbers. The access
code for trunk or trunk group access (e.g. 0 or 9) is not counted as part of the 18.
DEFAULT DATA
NONE
PROGRAM BUTTONS
B Used to insert a flash code 'F'
C Used to insert a pause code 'P'
D Used to insert a pulse/tone conversion code 'C'
E Used to mask/unmask following digits-shows as '[' or ']'
ACTION
1. Press Transfer button and enter 306.
Display shows:
2. Dial station number.
OR
Use Volume button to scroll through stations.
Press Right Soft button to move the cursor.
3. Enter the hot line destination, a station or
trunk ID (e.g., 9 or 701) with a maximum of
18 outgoing digits after the access code for
the CO call (see above list of options if needed)
4. Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
RELATED ITEMS
MMC 502
Samsung Business Communications
STATION-WIDE TIMERS (OFF-HOOK SELECTION TIMER)
OfficServ 7200 Programming Guide
DISPLAY
[201] HOT LINE
NONE
[205] HOT LINE
NONE
[205] HOT LINE
9-1305P4264100_
2-77