Samsung OfficeServ 7200 Programming Manual page 38

CHAPTER 2. MMC Programming
[103] SET ANSWER MODE
Allows the system administrator to change the answer mode of any phone. Each phone can
have its answer mode set to one of the following options:
No
0 RING MODE
1 AUTO ANSWER MODE
2 VOICE ANNOUNCE
* To answer C.O. calls automatically, also set ON the option AUTO ANS CO in
DEFAULT DATA
ALL PHONES: RING
ACTION
1. Press Transfer button and enter 103.
Display shows:
2. Dial phone number.(e.g., 205)
OR
Press Volume button to select phone and
press Right Soft button to move cursor.
OR
Select all phones.
3. Dial 0, 1 or 2 to change ring mode.
OR
Press Volume button to select ring mode and
press Right Soft button to return to step 2 above.
Samsung Business Communications
Type
The phone will ring in one of eight custom ring patterns. Calls
are answered by pressing the ANS/RLS or SEND button or
by lifting the handset.
After giving a short attention tone, the phone will automati-
cally answer calls on the speakerphone. When a Trunk line is
transferred to a phone in Auto Answer, the screened portion
of the call will be Auto Answered, but the phone will ring when
the transfer is complete if you have not pressed the ANS/RLS
or SEND button or lifted the handset.*
The phone will not ring. After a short attention tone, callers
can make an announcement but the ANS/RLS or SEND but-
ton or handset must be used to answer calls.
OfficServ 7200 Programming Guide
Description
MMC 110.
DISPLAY
[201] ANS MODE
RING MODE
[205] ANS MODE
RING MODE
[ALL] ANS MODE
?
[205] ANS MODE
VOICE ANNOUNCE
2-7