Samsung OfficeServ 7200 Programming Manual page 391

CHAPTER 2. MMC Programming
[853] MAINTENANCE BUSY
This MMC is used to place stations, trunks and common resources equipment in a mainte-
nance busy condition. This can be used to isolate suspected intermittent problems. Stations
placed in maintenance busy will behave like a station in DND when called. The calling sta-
tions display will show 'MADE BUSY'. Stations receiving DID or E&M type calls will re-
ceive a DND/ No more calls tone. The station display will still function with station and
date.
When the busy station is accessed, it will function like a 'locked all' station. Trunks made
busy cannot originate calls. Ring down type trunks will still ring the programmed destina-
tion. Common resource equipment such as DSPs, CID DSPs and miscellaneous equipment
such as page ports and voice mail card ports can also be placed in a maintenance busy state.
MAINTENANCE BUSY OPTIONS
No
0 TRK
1 STN
2 PAGE
4 DTMFR
5 CID
6 R2MFC
7 CONF
8 MGI
DEFAULT DATA
ALL IDLE
Samsung Business Communications
Option
DTMFR/CID/R2MFC DSP
If DTMFR, CID or R2MFC is selected when DSP is not mounted, display will
show NONE. If mounted, display will show IDLE by default.
OfficServ 7200 Programming Guide
Description
Trunks
Stations
Page Ports
DTMF Receiver (4/DSP)
CID Receiver (14/DSP)
R2MFC Receiver (8/DSP)
GRP #01-24
MGI Ports
2-360