Samsung OfficeServ 7200 Programming Manual page 385

CHAPTER 2. MMC Programming
No Code
MJB--
08 MJB01
09 MJB02
10 MJB03
11 MJB04
12 MJB05
13 MJB06
14 MJB07
MJC--
16 MJC01
17 MJC02
25 MJC10
26 MJC11
27 MJC12
28 MJC13
31 MJC16
32 MJC17
Samsung Business Communications
Alarm Name
LCP/TASK Error LCP or TASK Fault
HDLC Com Error Communications to LCP lost or faulty.
Memory Alarm 1 A RAM diagnostic check error has occurred in the
MCP2.
Memory Alarm 2 A RAM diagnostic check error has occurred in cabinet 1
SCP2.
Memory Alarm 3 A RAM diagnostic check error has occurred in cabinet 2
LCP2.
Memory Alarm 4 A RAM diagnostic check error has occurred in cabinet 3
LCP2.
IPC MSGQ Over IPC TX queue full error has occurred in the MCP2.
Alarm data = IPC Queue type
(MCP-LAN, MCP-SCP, MCP-LCP1, MCP-LCP2)
Task MSGQ Over Task MSG queue full error has occurred in the MCP2.
Alarm data = Error Task
DSP Error System DSP Fault
DTMF Fault An abnormal interrupt has occurred in the system
DTMF resources.
Alarm data = DTMF Receiver DSP position
Tone Fault An abnormal interrupt has occurred in the system
tone resources.
Alarm data = TONE Receiver DSP position.
AA-DTMF Fault An abnormal fault reported in one of the AA card
DTMF resources.
Alarm data = Cabinet, Slot, Port (Cx-Syy-Pzz)
AA-MFR Rec An abnormal fault reported in one of the AA card
DTMF resources has recovered.
Alarm data = Cabinet, Slot, Port (Cx-Syy-Pzz)
E911 Restart The E911 card has restarted.
Alarm data = Cabinet, Slot (Cx-Syy)
E911 Block The E911 card has blocked because the system
detects the card does not work correctly.
Alarm data = Cabinet, Slot (Cx-Syy)
WLI Restart The WLI card has restarted.
Alarm data = Cabinet, Slot (Cx-Syy)
WLI Block The WLI card has blocked because the system
detects the card does not work correctly.
Alarm data = Cabinet, Slot (Cx-Syy)
OfficServ 7200 Programming Guide
Definition
2-354