Samsung OfficeServ 7200 Programming Manual page 191

CHAPTER 2. MMC Programming
[511] MSG WAITING LAMP CADENCE
This MMC defines the cadence (flash rate) of single line telephone message waiting lamps
on phones connected to systems with an MWSLI card. There are two choices for the MW
lamp cadence: continuous and interrupted.
No
0 INTERRUPTED
1 CONTINUOUS
CONDITIONS
Systems with MWSLI cards only.
DEFAULT DATA
INTERRUPT LED: 1000MS-ON 1000MS-OFF
ACTION
1. Press Transfer button and enter 511.
Display shows:
2. Press 0 or 1 to select CADENCE.
OR
Press Volume button to make selection.
Press Right Soft button to advance step 3.
3. Dial new values for interrupt times (four digits)
Press Right Soft button to move cursor back.
If valid entry, system returns to step 2.
Press Left Soft button to move cursor back.
If valid entry, system returns to step 2.
4. Press Transfer button to save and exit.
OR
Press Speaker button to save and advance to next MMC.
RELATED ITEMS
NONE
Samsung Business Communications
Item
The MW lamp will flash at a rate determined by the timer settings.
The shortest 'on' time is 100 ms and the longest 'on' time is 3000 ms.
The timer is adjusted in 100 ms increments.
When an MWSLI port has a message, the lamp will be lit steady.
OfficServ 7200 Programming Guide
Description
DISPLAY
MW LAMP CADENCE
INTERRUPT LED
MW LAMP CADENCE
INTERRUPT LED
MW LAMP CADENCE
2000 2000
2-160