Samsung OfficeServ 7200 Programming Manual page 124

CHAPTER 2. MMC Programming
[400] CUSTOMER ON/OFF PER TRUNK
Assigns several options (listed below) on a per-trunk basis.
No Option
0 1A2 EMULATION
1 TRUNK INC DND
2 TRUNK FORWARD
3 LCR ALLOW
6 EFWD EXT CLI
7 REPEAT CLI
8 TONECHK DISC
9 AUTO ANSWER
DEFAULT DATA
1A2 EMULATE : OFF
TRK INC. DND : OFF
TRK FORWARD : ON
EFWD EXT CLI : ON
REPEAT CLI
Samsung Business Communications
Default
OFF When this option is set to ON up to 4 internal stations
can participate in a conversation on this trunk by press-
ing the trunk key.
OFF When this option is set to ON a trunk that is pro-
grammed to ring a specific station(a private line or DIL)
will ring at that station if the station is in DND.
ON When this option is set to OFF this trunk will not follow a
ringing stations call forwarding.
OFF Allows LCR to be switched ON/OFF when a trunk is
accessed using a DT key or by dialling its port number
(e.g. 701).
ON This option determines what kinds of CLI number will be
sent to the external forwarded outgoing call.(Station or
Received CLI from Trunk)
ON This option determines what kinds of CLI number will be
sent to the trunk to trunk call.(Trunk or Received CLI
from Trunk)
OFF When this option is set to ON, loop trunk can be discon-
nected by detecting busy tone. (To use this feature, the
LP TRK TONE DISC option in MMC 861 must be set to
ENABLE.)
OFF When this option is set to ON, Auto Answer mode can
be assigned on a per-trunk basis.
: ON
OfficServ 7200 Programming Guide
Description
2-93