CHAPTER 2. MMC Programming
[428] ASSIGN TRUNK/TRUNK USE
This MMC is used to allow or restrict trunks from making outgoing calls to other trunks
within the same system. By default (DIAL=YES) all trunks can use other trunks. To pre-
vent use, select NO.
DEFAULT DATA
DIAL: YES
ACTION
1. Press Transfer button and enter 428.
Display shows:
2. Dial the trunk use group number (e.g., 305)
OR
Press Volume button to selection and press
Right Soft button.
OR
Select all trunk use groups.
3. Dial the trunk use group number (e.g., 304)
OR
Press Volume button to selection and press Right
Soft button.
4. Dial 1 for YES or 0 for NO.
OR
Press Volume button to select YES/NO and
press Right Soft button to move cursor.
5. Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
RELATED ITEMS
MMC 614
Samsung Business Communications
STATION/TRUNK USE GROUP
OfficServ 7200 Programming Guide
DISPLAY
(301) USE (301)
DIAL:YES
(305) USE (301)
DIAL:YES
(ALL) USE (301)
DIAL:YES
(305) USE (304)
DIAL:YES
(305) USE (304)
DIAL:NO
2-132