Samsung OfficeServ 7200 Programming Manual page 132

CHAPTER 2. MMC Programming
[406] TRUNK RING ASSIGNMENT
Enables ringing to a specific station or to a group of stations when incoming calls are re-
ceived. This MMC controls ring plan destinations for ring down trunks. If the ring plan
destinations are not entered, the default ring plan is ring plan 1.
DEFAULT DATA
ALL TRUNKS RING DEFAULT OPERATOR GROUP
ACTION
1. Press Transfer button and enter 406.
Display shows:
2. Dial trunk number (e.g., 704)
OR
Use Volume button to scroll through trunk numbers
and press Right Soft button to move the cursor.
OR
Select all.
3. Dial ring plan number or press Right Soft button to
move to the next step.
4. Dial station number or station group number
(e.g., 205)
OR
Press Volume button to make selection and
press Right Soft button to move cursor to the
next ring plan destination and repeat step 4.
OR
Press Left Soft button to return to step 3.
5. Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
RELATED ITEMS
MMC 202
MMC 507
MMC 601
Samsung Business Communications
CHANGE FEATURE PASSCODES
ASSIGN RING PLAN TIME
ASSIGN STATION GROUP
OfficServ 7200 Programming Guide
DISPLAY
[701] TRK RING
1:500 2:500
[704] TRK RING
1:500 2:500
[All] TRK RING
1:500 2:500
[704] TRK RING
1:500 2:500
[704] TRK RING
1:205 2:500
[704] TRK RING
1:205 2:501
2-101