Samsung OfficeServ 7200 Programming Manual page 399

CHAPTER 2. MMC Programming
[861] SYSTEM OPTIONS
Sets a number of system options.
DEFAULT DATA
AUTO UPDATE TIME : DISABLE
SYSTEM SPEED BIN : MAX 500
IDLE WHEN ENBLOC: DISABLE
2 LINE ENBLOCK: DISABLE
2 ZONE EXT PAGE: DISABLE
USE LB FOR PAGE: NONE
LP TRK TONE DISC: DISABLE
ISDN SS FEATURE: DISABLE
No. Option
AUTO UPDATE TIME
00
SYSTEM SPEED BIN
01
IDLE WHEN ENBLOC
02
03 2 LINE ENBLOCK
04 2 ZONE EXT PAGE
05 USE LB FOR PAGE
06 LP TRK TONE DISC
08 ISDN SS FEATURE
ACTION
1. Press Transfer button and enter 861.
Display shows:
2. Enter the option number.
OR
Press Volume button to select and press
Right Soft button to move cursor.
3. Enter 1 or 0 to enable or disable
OR
Press Volume button to select and press
Right Soft button to store.
Samsung Business Communications
Description
Updates the system time from the ISDN network (Enable / Dis-
able).
Sets 500 (dial 0) or 950 (dial 1) as the maximum number of sys-
tem speed dial bins. If 950 is set, speed dial bin numbers are al-
ways three digits (000 to 999).
Decides the state of Large LCD phones (idle or busy) when
users are dialling in ENBLOC mode (Enable / Disable).
Enables ENBLOC dialling for 2-line LCD phones with navigation
buttons (Enable / Disable).
Enables paging to two external zones (one zone available by de-
fault) (Enable / Disable).
Use Loud Bell port for paging zone.
When this option is set to ON, loop trunk can be disconnected by
detecting busy tone.
Enables ISDN Supplementary Services (Enable / Disable).
OfficServ 7200 Programming Guide
DISPLAY
AUTO UPDATE TIME
DISABLE
AUTO UPDATE TIME
DISABLE
AUTO UPDATE TIME
ENABLE
2-368