Samsung OfficeServ 7200 Programming Manual page 175

CHAPTER 2. MMC Programming
Timer Name
TRK AUTOMOH DISC
TSW CONN. DELAY
UCDS AUDIO ALARM
UCDS VISUAL ALARM
VOIP RE-ROUTE TM
DEFAULT DATA
SEE DESCRIPTION
SOME TIMERS DEPEND ON COUNTRY
Samsung Business Communications
Default Range Unit
60 1-250 SEC
0 0-10 SEC
0 0-990 SEC
0 0-250 SEC
15 0-25 SEC
Some timers are disabled when their value is set to '0'.
OfficServ 7200 Programming Guide
Description
When set to ON, incoming trunk calls are
connected to MOH automatically after the
DISA ANSWR timer (MMC 503) expires. In
this case the caller hears MOH. If the TRK
AUTOMOH DISC timer expires before the call
is answered, the call is disconnected.
When an incoming trunk makes an outgoing
call to another trunk, the system connects the
voice path after this time.
When an SVMi-20 card is installed and the digital
UCD package enabled, this counter determines
the maximum number of seconds a call has been
waiting at the UCD group before the UCD
group's SUPV key begins to flash along with an
audio alarm. For more UCD alarm conditions,
see MMC 500.
When an SVMi-20 card is installed and the
digital UCD package enabled, this counter
determines the maximum number of seconds
a call at the UCD group before the UCD
group's SUPV key begins to flash as an
alarm. For more UCD alarm conditions, see
MMC 500.
If an outgoing call made via a VoIP trunk does
not receive an acknowledgement message
from the called party within this time, the call
is treated as failed.
2-144