Samsung OfficeServ 7200 Programming Manual page 241

CHAPTER 2. MMC Programming
[712] LCR ROUTE TABLE
The LCR ROUTE TABLE is responsible for selecting a specific trunk group in the comple-
tion of an outward bound call. This table works in conjunction with LCR DIGIT TABLE,
LCR TIME TABLE, LCR COS TABLE and LCR MODIFIED DIGITS TABLE. After you
dial a valid digit string, the system uses the LCR ROUTE TABLE to select a specific pre-
determined trunk group. There is a maximum of 32 routes available.
If more than one trunk group is available for call completion, the system uses the first des-
ignated trunk group and then the succeeding trunk groups. If all trunk groups are busy in a
selected route, call queue becomes active and allocates trunks as they become available.
DEFAULT DATA
NONE
ACTION
1. Press Transfer button and enter 712.
Display shows:
2. Dial LCR ROUTE table number (e.g., 05)
OR
Press Volume button to selected table and press
Right Soft button to move cursor.
3. Dial TIME BAND index number 1-4 (e.g., 2)
OR
Press Volume button to selected index and press
Right Soft button to move cursor.
4. Dial LCR COS number 1-8 (e.g., 4)
OR
Press Volume button to selected COS and press
Right Soft button to move cursor.
5. Dial TRUNK GROUP access code (e.g., 801)
OR
Press Volume button to selected access code and
press Right Soft button to move cursor.
Samsung Business Communications
OfficServ 7200 Programming Guide
DISPLAY
LCR ROUTE (01:1)
C:1 G:NONE M:---
LCR ROUTE (05:1)
C:1 G:NONE M:---
LCR ROUTE (05:2)
C:1 G:NONE M:---
LCR ROUTE (05:2)
C:4 G:NONE M:---
LCR ROUTE (05:2)
C:4 G:801 M:---
2-210