Samsung OfficeServ 7200 Programming Manual page 372

CHAPTER 2. MMC Programming
ACTION
1. Press Transfer button and enter 845.
2. When the cursor is on WLAN, press Volume button
and select WLAN, WBS, or SIP.
3. Press Right Soft button to move to the SYSTEM ID.
When the cursor is below SYSTEM ID, press
Volume button to select the setting menu for WLAN.
4. Set the items below at the WLAN menu.
SYSTEM ID: Use the Soft button to move the
cursor and enter the new WLAN SYSTEM ID to
register.
Press Soft button and proceed to next register status.
Register the SYSTEM KEY.
Register the 1
Register the 2
Register the 2
Select the voice codec. Select from G711a, G711u,
and G729 CODEC.
Numbers are given from 1 to 4 based on priority.
Select the usable RF channel. Maximum six channels
can be used for a system.
(Default RF channel: 1, 6, 11)
Used to change the TX POWER of all WBS.
(Default: LEVEL 1~4)
Used to clear registration information of all WBS.
Samsung Business Communications
st
DNS server IP.
nd
DNS server IP.
nd
WBS IP.
OfficServ 7200 Programming Guide
DISPLAY
WLAN: SYSTEM ID
WBS24
WLAN: SYSTEM ID
WBS24
WLAN: SYSTEM ID
WBS24
WLAN: SYSTEM ID
WBS24
WLAN: SYSTEM KEY
00000
WLAN: 1ST DNS IP
0. 0. 0. 0
WLAN: 2ND DNS IP
0. 0. 0. 0
WLAN: 2ND WBS IP
0. 0. 0. 0
WLAN: CODEC LIST
CODEC 1: G.711a
WLAN: RF CHANNEL
USE CH 1: 01
WLAN: WBS TX PWR
DEFAULT
WLAN: CLR WBSREG
ARE YOU SURE?NO
2-341