Samsung OfficeServ 7200 Programming Manual page 393

CHAPTER 2. MMC Programming
[854] DIAGNOSTIC TIME
Provides a means to set the Diagnostic Time. The system diagnostics tests include memory
audits, internal loopback tests on digital trunks, and DSP, AA DSP tests. Additional tests
include CODEC tests on analogue trunk and station cards and tone tests. If the diagnostics
cannot complete the tests because of system traffic, the system will abort the tests and retry
during the next programmed diagnostic time. It is recommended to assign the diagnostic
time during non-peak traffic periods.
DEFAULT DATA
NO DIAGNOSTIC TIME SET
ACTION
1. Press Transfer button and enter 854.
Display shows:
2. Enter weekday number.
(0: Sun, 1: Mon, ..., 6: Sat)
OR
Press Volume button to make selection and press
Right Soft button to move cursor.
3. Enter hour (24-hour clock) via the dial keypad.
Cursor will advance to next entry.
4. Enter minutes (24-hour clock) via the dial keypad.
Cursor will return to step 2.
5. Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
RELATED ITEMS
MMC 851
MMC 852
MMC 853
Samsung Business Communications
ALARM REPORTING
SYSTEM ALARM ASSIGNMENTS
MAINTENANCE BUSY
OfficServ 7200 Programming Guide
DISPLAY
DIAGNOSTIC TIME
SUN: :
DIAGNOSTIC TIME
SUN:_ :
DIAGNOSTIC TIME
SUN:23:_
DIAGNOSTIC TIME
SUN:23:30
2-362