Samsung OfficeServ 7200 Programming Manual page 137

CHAPTER 2. MMC Programming
[410] ASSIGN DISA TRUNK
Allows the system to have Direct Inward System Access (DISA). Because there is a possi-
bility that unauthorized calls will be made via this feature, several safeguards have been
added. Users must be informed of these to prevent unnecessary service calls. DISA can
lock out when a predetermined number of invalid consecutive calls are attempted. Callers
will then receive error tone until the programmable timer has expired.
CONDITIONS
The * key may be used to initiate new dial tone while in a station to station call.
The # button may be used to terminate the DISA call and disconnect the central office
line. DISA lines must be assigned to the ring plan(s).
DEFAULT DATA
ALL TRUNKS: NORMAL
ACTION
1. Press Transfer button and enter 410.
Display shows:
2. Dial trunk number (e.g., 704)
OR
Press Volume button to select trunk and press
Right Soft button.
OR
Select all trunks.
OR
3. Press Volume button to select a Ring Plan (e.g. 3)
OR
Using the dial keypad, press 1 to select or 0 not to se-
lect the Ring Plan (e.g. 1 to select).
Press Right Soft button to return to step 2.
4. Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
RELATED ITEMS
MMC 500
Samsung Business Communications
SYSTEM-WIDE COUNTERS
OfficServ 7200 Programming Guide
DISPLAY
[701] 123456
DISA LINE:000000
[704] 123456
DISA LINE:000000
[ALL] 123456
DISA LINE:000000
[704] 123456
DISA LINE:001000
2-106