Samsung OfficeServ 7200 Programming Manual page 364

CHAPTER 2. MMC Programming
[842] SIP STATION INFORMATION
This MMC provides a means of registering the SIP with the OfficeServ 7200 system.
No. Parameter
0 USER ID
1 HOST NAME
2 USER PSWD
3 IP ADDR
4 PHONE TYPE
CISCO/SAMSUNG
5 USER FLAG
6 AUTH TYPE
7 ALGO USED
8 CURRENT STATUS
3 MAC ADDR
4 SIG PORT
5 VOICE PORT
6 IP TYPE
7 DSP TYPE
8 PHONE TYPE
9 REGIST CLR
10 FRAME CNT
11 JITTER BUF
12 TOS FIELD
13 SW VERSION
14 SW UPGRADE
Samsung Business Communications
When phone is registered, user ID for checking user
Name of phone host device
When phone is registered, user password for checking user
IP address of IP phone
Type of phone connected
-
-
Encryption algorithm used
connected or disconnected
Hardware address of IP phone
IP port to communicate with message to IP phone
IP port to communicate with voice packet to IP phone
Type of IP address (0. PRIVATE, 1. PUBLIC)
DSP type if communicating as IP phone
(0. G.711, 1. G.729A)
Type of IP Phone (0. SAMSUNG, 1. SIP STANDARD)
Delete information for registered IP phone
This parameter set to buffering count of voice packets in case of
transferring ones
This parameter provide guideline of controlling Jitter Buffering op-
eration when voice packet translate PCM voice packet
Set to TOS (Type Of Service) field value
Display registered IP phone version
Set to SW upgrade
OfficServ 7200 Programming Guide
Description
2-333