Samsung OfficeServ 7200 Programming Manual page 149

CHAPTER 2. MMC Programming
[418] BRI AND PRI CARD RESTART
This MMC is used to restart a BRI or PRI card at the card level. This action is required to
update the processor on the BRI or PRI card with any changes in the card setup MMCs and
to put these changes into effect.
CONDITIONS
A BRI card or TEPRI card must be installed in the system.
Before setting the PRI program, the J2 jumper of the TEPRI card must be set ON to
PRI mode.
DEFAULT DATA
NONE
ACTION
1. Press Transfer button and enter 418.
Display shows first BRI or PRI circuit:
2. Dial first trunk on a BRI or PRI card (e.g., 733)
OR
Press Volume button to select the first trunk
and press Right Soft button to move the cursor.
3. Dial 1 for YES or 0 for NO.
Pressing 1 will advance to step 4.
4. Dial 1 for YES or 0 for NO.
Pressing 1 or 0 will return to step 2.
5. Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
RELATED ITEMS
MMC 419
MMC 420
MMC 423
MMC 424
Samsung Business Communications
BRI OPTIONS
PRI OPTIONS
S/T MODE
BRI S0 MAPPING
OfficServ 7200 Programming Guide
DISPLAY
[725] RESTART
CARD RESTART?NO
[733] RESTART
CARD RESTART?NO
[733] RESTART
CARD RESTART?YES
[733] RESTART
ARE YOU SURE?YES
2-118