Chapter 2. Mmc Programming; Summary Of Programming Procedures - Samsung OfficeServ 7200 Programming Manual

CHAPTER 2.
This chapter describes how to use each MMC program. MMCs are listed in numerical
order beginning at 100.

Summary of Programming Procedures

Please read the following carefully. It describes the basic steps required for successful
programming.
1. Enter programming mode.
i) Press the Transfer button.
ii) Enter either 200 (for customer level) or 800 (for technician level).
iii) Enter either the customer passcode or the technician passcode depending on
your selection in step (ii).
iv) Press dial button 1 (or use the Volume button) to enable programming mode.
v) Press the Speaker button to display the program selection mode (or press
the Transfer button to leave programming mode if you don't want to continue).
2. Select a program.
Enter the MMC number you require. Or, select the MMC number with the Volume
buttons and press the Speaker button.
3. Start programming.
Follow the description given for the selected MMC.
If this is the first time the system has been programmed after installation, run
MMC 812 to set the appropriate system software version for your country be-
fore doing any other programming.
2-1
MMC Programming