Samsung OfficeServ 7200 Programming Manual page 351

CHAPTER 2. MMC Programming
[836] H.323 GK OPTIONS
Provides a means to set the H.323 gatekeeper parameters for an optional, external industry-
standard H.323 network gatekeeper, using Registration, Admissions and Status signalling
(RAS). The settings apply system wide.
No Parameter
00 GK CONNECTION
01 GK ROUTING
02 GK IP ADDRESS
03 GK NAME
04 ALTER GK IP
ADDR
05 H.323 GATEWAY
ID
06 E.164 GATEWAY
NO
07 GK KEEP ALIVE
08 GK DOWN ROUTE
09 GK RAS TYPE
10 URQ REASON
MODE
12 RRQ FAIL TIME
13 GRQ SEND
14 USE MULTI E.164
Samsung Business Communications
When changing any IP address/value, three digits must be entered for each
(octet) field. For example, 192.168.1.10 should be entered as 192 168 001 010
This enables the H.323 call to connect to a gate-
keeper.
This enables routing of calls through a gatekeeper.
This is the gatekeeper's IP address.
This is the alphanumeric identifier of the gatekeeper.
(Up to 16 characters.)
This provides an alternate gatekeeper address.
This is the H.323 identifier used by the MGI when
registering with the gatekeeper. (Up to 32 charac-
ters.)
This is the E.164 identifier used by the H.323 trunk
when registering with the gatekeeper. (Up to 16 dig-
its long.)
This is the timer that the MGI uses to acknowledge
the presence of the gatekeeper. The range is
000~999 seconds.
This provides an alternate route if the primary gate-
keeper is down. Selections are PSTN or ALTER GK.
Select if AUTO or MANUAL, depending on your
gatekeeper's capabilities.
Select ON or OFF for use of Un-register Request
RAS (URQ) messages.
Programs the time frame to re-send Registration
Request RAS (RRQ) messages to a gatekeeper.
The range is 1~99.
Select ON or OFF for use of Gatekeeper RAS Re-
quest (GRQ) messages.
When this option is set to ENABLE, the E.164 identi-
fier can be assigned.
OfficServ 7200 Programming Guide
Description Default
DISABLE
DISABLE
0.0.0.0
'Gatekeeper'
0.0.0.0
'OfficeServ'
1234
0 SEC
PSTN
AUTO
ON
30 seconds
OFF
DISABLE
2-320