Samsung OfficeServ 7200 Programming Manual page 187

CHAPTER 2. MMC Programming
DEFAULT DATA
START: NONE
END: NONE
ACTION
1. Press Transfer button and enter 507.
Display shows:
2. Dial day number (0-6, e.g., 3 for Weds)
OR
Press Volume button to select day.
Press Right Soft button to advance cursor to step 3.
3. Dial ring plan number (1-6, e.g., 2)
OR
Press Volume button to select day.
Press Right Soft button to advance cursor to step 4.
4. Dial start time (e.g., 1030)
If valid, cursor moves to end time.
Enter end time.
If valid, system returns to step 2.
Begin again.
5. Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
RELATED ITEMS
MMC 722
MMC 723
Samsung Business Communications
Ring Plan 1 is the default Ring Plan for each day. If no Ring Plan destination is
entered, the operator group is the default destination.
STATION KEY PROGRAMMING
SYSTEM KEY PROGRAMMING
OfficServ 7200 Programming Guide
DISPLAY
RING PLAN (SUN:1)
ST: END:
RING PLAN (WED:1)
ST: END:
RING PLAN (WED:2)
ST:_ END:
RING PLAN (WED:1)
ST:1030 END:1800
2-156