Samsung OfficeServ 7200 Programming Manual page 273

CHAPTER 2. MMC Programming
Option
PROGRESS
TONE ID
CALLER ID
NUMBER
GENERAL RULES
1. 201 is talking to a trunk and presses TRANSFER plus the station number, but the sta-
tion is forwarded to VM/AA and VM/AA answers. When this happens, if 201 presses
TRANSFER again to return to the trunk, the VM/AA port is not on hold. It is discon-
nected.
2. A VM/AA port leaves a message indication for a station. When the station returns the
message, any available port in the VM/AA group should ring, not only the one that
left the message.
3. A VM/AA port leaves a message for a station. When the station returns the message,
the MESSAGE LED is not automatically turned off. If a VM/AA system turns on the
MESSAGE LED, the VM/AA system must turn it off.
4. If DTMF call progress tones are not enabled, the system sends regular call progress
tones.
5. When a VM/AA port calls a station that is in the AUTO ANSWER or VOICE AN-
NOUNCE mode, the phone will be forced to ring.
Samsung Business Communications
These are the DTMF codes that is sent to the VMAA port in place
of regular progress tones. For example, when a VMAA port goes
off hook to originate or transfer a call, instead of hearing normal
dial tone, it will hear DTMF 'BA'. Progress tones can greatly in-
crease the efficiency of a VMAA system because it is easier and
quicker to detect DTMF than a busy, ring back or DND tone.
Progress tones can identify any of the following.
No Call Type
0 DIAL TONE Dial Tone
1 BUSY TONE Busy Tone
2 RINGBAK Ringback Tone
TONE
3 DND NO DND or No More Call Button Error
MORE
4 HDSET Off Hook Answer
ANSWER
5 SPKER On Hook Answer
ANSWER
If set to YES, when the voice mail auto attendant system an-
swers a call the system will send Caller ID data as DTMF tones
to the VMAA port.
OfficServ 7200 Programming Guide
Description
Description
Default
Default
No
No
No
No
No
No
No
2-242