Samsung OfficeServ 7200 Programming Manual page 387

CHAPTER 2. MMC Programming
No Code
MJD--
50 MJD18
51 MJD19
52 MJD20
53 MJD21
54 MJD22
MJE--
55 MJE01
56 MJE02
57 MJE03
58 MJE04
59 MJE05
60 MJE06
61 MJE07
62 MJE08
63 MJE09
Samsung Business Communications
Alarm Name
DTRK Error ISDN or E1 card Fault
E1 Restart The E1 card has restarted
Alarm Data = Cabinet, Slot (Cx-Syy)
PRI Restart The PRI card has restarted
Alarm Data = Cabinet, Slot (Cx-Syy)
BRI Restart The BRI card has restarted
Alarm Data = Cabinet, Slot (Cx-Syy)
PCM Loss Loss of PCM coding on a digital facility.
Alarm Data = Cabinet, Slot (Cx-Syy)
PCM Recovery Loss of PCM coding on a digital facility.
Alarm Data = Cabinet, Slot (Cx-Syy)
MGI Error MGI card Fault
MGI Restart The MGI card has restarted
Alarm Data = Cabinet, Slot (Cx-Syy)
MGI Stop The MGI card has stoped
Alarm Data = Cabinet, Slot (Cx-Syy)
MGI IP Duplicate The MGI card IP address is duplicated
Alarm Data = Cabinet, Slot (Cx-Syy)
MGI NTWK Error The MGI card has blocked because the system detects
the card doesn't respond via network link.
External ping test.
Alarm Data = Cabinet, Slot (Cx-Syy)
MGI NTWK Rec The MGI card has restarted because the system detects
the card does respond via network link.
External ping test.
Alarm Data = Cabinet, Slot (Cx-Syy)
MGI DSP Error The MGI card DSP has blocked because the system
detects the card DSP does not run correctly.
Alarm Data = Cabinet, Slot (Cx-Syy-Pzz)
MGI DSP Run The MGI card DSP has restarted because the system
detects the card DSP runs correctly.
Alarm Data = Cabinet, Slot (Cx-Syy-Pzz)
WBS Disconnect Indicates the WBS is disconnected.
Alarm Data = CWBS:xx or BWBS:xx
WBS connect Indicates the WBS is connected.
Alarm Data = CWBS:xx or BWBS:xx
OfficServ 7200 Programming Guide
Definition
2-356