Samsung OfficeServ 7200 Programming Manual page 318

CHAPTER 2. MMC Programming
[815] CUSTOMER DATABASE COPY
This enables the on-board customer database (SRAM) to be copied to the Smart Media
card database (SMDB) and also allows the SMDB database to be copied to the SRAM. A
daily save can be programmed to automatically save the SRAM to the SMDB. This ensures
that an up-to-date database is always available in case of a catastrophic failure. A daily save
time of 00:00 means that no daily save is performed.
It is recommended that the SMDB is cleared before the SRAM is copied to it. When the
SRAM is copied to the SMDB there is no interruption in service. If the SMDB is copied to
the SRAM, the system will reset to accept the new data.
SMDB (Smart Media card database)
Option
S:mm/dd/yy hh:mm
CLEAR SMDB
COPY TO SRAM
SRAM (MCP on-board database)
Option
S:mm/dd/yy hh:mm
COPY TO SMDB
DAILY SAVE hh:mm
DEFAULT DATA
DAILY SAVE 00:00 (no daily save)
ACTION
1. Press Transfer button and enter 815.
Display shows:
If the Smart Media card is in use, the display shows:
2. Press Right Soft button to move cursor.
Samsung Business Communications
Indicates the time the database was saved to the SMDB
Clear SMDB
Copy SMDB to SRAM
Indicates the time the SRAM was last saved
Copy SRAM to SMDB
The time the SRAM will be saved to the SMDB
A Smart Media card of 16 MB or 32 MB must be installed in order to copy the
SRAM to the SMDB.
OfficServ 7200 Programming Guide
Description
Description
DISPLAY
CUST DBASE:SMDB
S:12/01/01 00:00
CUST DBASE:SMDB
SMART IS BUSY
CUST DBASE:SMDB
S:12/01/01 00:00
2-287