Samsung OfficeServ 7200 Programming Manual page 222

CHAPTER 2. MMC Programming
[701] ASSIGN COS CONTENTS
Similar to MMC 700 but does not allow a copy command. This MMC is primarily used for
creating a new class of service (COS). A maximum of 30 classes of service are allowed.
NOTE: If the 'unsupervised conference' feature is enabled, a programmed CONF key must be avail-
able on phones to allow re-entry into a conference call.
This MMC is divided into 5 categories.
No Category
0 TOLL LEVEL
1 USABLE FEATURE
Samsung Business Communications
TOLL
0 A Follow toll class A (Unrestricted)
1 B Follow toll class B in MMC 702, 703
2 C Follow toll class C in MMC 702, 703
3 D Follow toll class D in MMC 702, 703
4 E Follow toll class E in MMC 702, 703
5 F Follow toll class F in MMC 702, 703
6 G Follow toll class G in MMC 702, 703
7 H Follow toll class H (All restricted)
No COS
00 AA CALER
01 ABSENCE
02 ALM CLR
03 AUTO RDL
04 CALLBACK
05 CLIP ABN
06 CLIP INQ
07 CLIP INV
08 CONFER.
09 DALM CLR
10 DIRECT.
11 DISA
12 DND
13 DND FWRD
14 DND OVRD
15 DOOR
16 DSS
17 DTS
18 EXT AREC
19 EXT FWD
OfficServ 7200 Programming Guide
Description
LEVEL
Default Description
YES Auto answer control by caller
YES Absence
YES Alarm Clear
YES Retry on busy
YES Callback
YES Caller ID Abandon
YES Caller ID Inquire
YES Caller ID Investigate
YES Conference
YES DISA alarm ring clear
YES Directory dial
YES Allow DISA use
YES Do Not Disturb
YES Forward Do Not Disturb
NO Do Not Disturb Override
YES Door ring answer
YES Direct station select
YES Direct trunk select
NO Intercom call automatic record
(SVM-800)
YES External call forward
2-191