Samsung OfficeServ 7200 Programming Manual page 389

CHAPTER 2. MMC Programming
No Code
80 MNF17
81 MNF18
82 MNF19
83 MNF20
84 MNF21
85 MNF26
86 MNF27
87 MNF28
88 MNF29
MNG--
89 MNG01
90 MNG02
91 MNG03
92 MNG04
93 MNG05
94 MNG06
Samsung Business Communications
Alarm Name
PSU Alarm Rec
Over-configuration of cabinet has been corrected.
Alarm Data = Cabinet, Slot (Cx-Syy)
SLI Fault An SLI card has been detected as out of service via an
internal CODEC test.
Alarm Data = Cabinet, Slot, Port (Cx-Syy-Pzz)
SLI Recovery An SLI card detected as out of service has been de-
tected as recovered and is in service via internal CO-
DEC test.
Alarm Data = Cabinet, Slot, Port (Cx-Syy-Pzz)
PSUB Alarm Indicates there are over 120 ports in a cabinet with two
PSUs.
Alarm Data = Cabinet, Slot (Cx-Syy)
DSS Alarm System capacity of 64-button DSS modules has been
exceeded.
SIO RxQ Over SIO Tx Queue full error has occurred in the MCP2.
Alarm Data = SIO number (SIO: x)
SIO RxQ Under SIO Tx Queue under error has occurred in the MCP2.
Alarm Data = SIO number (SIO: x)
LAN Printer Err LAN printer error has occurred in the MCP2.
Alarm Data = Data Type (SMDR)
LAN Printer Rec LAN printer error has recovered in the MCP2.
Alarm Data = Data Type (SMDR)
Minor Error Minor Fault without Alarm Buffer saving
Phone Discon- Indicates the Phone is disconnected.
nect Alarm Data = Tel number or Cx-Syy-Pzz
Phone Connect Indicates the Phone is connected.
Alarm Data = Tel number or Cx-Syy-Pzz
Off Hook Alarm Indicates Extension Off Hook Alarm timer has expired.
Alarm Data = Tel number or Cx-Syy-Pzz
On Hook Indicates the Off Hook Alarm Extension is on hook.
Alarm Data = Tel number or Cx-Syy-Pzz
MGI Packet Loss Indicates the MGI connection RTP packet loss is more
than 10 %.
Alarm Data = Tel number or Cx-Syy-Pzz
MGI Packet Delay Indicates the MGI connection RTP packet delay is more
than 500 ms.
Alarm Data = Tel number or Cx-Syy-Pzz
OfficServ 7200 Programming Guide
Definition
2-358