Samsung OfficeServ 7200 Programming Manual page 369

CHAPTER 2. MMC Programming
[845] WLAN PARAMETERS
This MMC modifies the WLAN parameters.
The SYSTEM KEY is used internally to distinguish between systems when registering a
terminal. The default value is '00000', but this must be changed to another value to enable
the use of WLAN terminals. In addition, the SYSTEM KEY serves as an identification ID
when a WLAN terminal connects to the WBS24.
The default value of the SYSTEM ID, 'WBS24', must also be changed to another value in
order to use multiple systems in one area. The DNS setting for WLAN is additionally de-
scribed in this MMC.
Set the network configuration for WBS24 by setting the IP assignment, Netmask and
Gateway. These settings should be compatible with the Intranet since the network configu-
ration setting is essential for data service. In addition, the RF frequency for WBS24 should be se-
lected. Currently up to 14 frequencies may be selected.
Session Initiation Protocol (SIP) variables used for the WBS24 (Basic) can be defined.
WLAN PARAMETER
No Parameter
00 SYSTEM ID
01 SYSTEM KEY
st
02 1 DNS IP
nd
03 2 DNS IP
nd
04 2 WBS IP
05 CODEC LIST
06 RF CHANNEL
Samsung Business Communications
Description
ID used for distinguishing systems in a wireless
environment. Different IDs must be assigned to
different systems.
Key used for registering terminals. Different values
must be assigned to each system.
First Domain Name Server (DNS) IP address
Second Domain Name Server (DNS) IP address
IP addresses of all WBSs in system used by wire-
less terminal. Different IPs must be assigned to
each system.
CODEC that can be used for VoIP calls between
WBS24 and terminal. G.711u, G.711a, G.726, and
G.729 can all be assigned.
Set a RF CHANNEL value that can be used by
WBS.
OfficServ 7200 Programming Guide
Default
WBS24
00000
0.0.0.0
0.0.0.0
168.208.144. 10
CODEC 1: G.711a
CODEC 2: NONE
CODEC 3: NONE
CODEC 4: NONE
USE CH 1: 01
USE CH 2: 06
USE CH 3: 11
USE CH 4: 00
USE CH 5: 00
USE CH 6: 00
2-338