Samsung OfficeServ 7200 Programming Manual page 353

Enterprise ip solutions
Hide thumbs Also See for OfficeServ 7200:
Table of Contents

Advertisement

CHAPTER 2. MMC Programming
[837] SIP OPTIONS
This MMC permits the adjustments of optional Session Initiation Protocol (SIP) trunk pa-
rameters. The MCP supports SIP and H.323 on a per-call-per-port basis. The settings are
system wide.
No
Parameter
00
GATEWAY
CALL ID
01
CALLER ID
TYPE
05
DEFAULT DIL
NO
06
UDP PORT:
TRUNK
07
UDP PORT:
PHONE
09
RE-TRANS.
T1 TIME
10
RE-TRANS.
T2 TIME
11
RE-TRANS.
T4 TIME
12
GENERAL
RING TM
13
INVITE LING
TM
Samsung Business Communications
When changing any IP address/value, three digits must be entered for each
(octet) field. For example, 192.168.1.10 should be entered as 192 168 001 010.
Numeric system identifier (up to 12 digits).
This option controls the calling party identification type.
There are 3 possible selections:
0 GWID: shows the gateway call ID.
1 ANI: shows the calling station number (default)
2 IP: shows the calling H.323 gateway IP address.
This allows programming of the default direct-in-line
number when digits are missing or incorrect on an in-
bound call.
Sets the UDP port used on a SIP trunk call.
Sets the UDP port used on a SIP phone call.
The initial re-transmission time if there is no answer,
based on the RFC2543 specification. The range is
0~9900 ms.
The maximum re-transmission time if there is no answer,
based on the RFC2543 specification. The range is
0~9900 ms.
The time the User Agent Server waits after receiving the
ACK message. Based on the RFC2543 specification. The
range is 0~9900 ms.
The server retransmits the response for this length of
time until the requested retransmission is received. For
example, the wait time after sending 200 OK for INFO.
The range is 0~99900 ms.
After the client sends ACK for the INVITE Final Response, the
client cannot confirm if the server received the ACK message.
The client waits for this length of time after sending ACK
for the Final Response. The range is 0~99900 ms.
OfficServ 7200 Programming Guide
Description
Default
'1234'
ANI
5000
5060
5070
500 ms
4000 ms
5000 ms
5000 ms
5000 ms
2-322

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents